4A ULTRA-FAST RECOVERY RECTIFIER
Features Mechanical Data
········
Glass Passivated Die Construction
Ultra-Fast Recovery Time for High EfficiencyHigh Maximum Junction Temperature
For Use in Low Voltage, High Frequency Inverters, FreeWheeling, and Polarity Protection ApplicationsHigh Forward Surge Current CapabilityLead Free Finish, RoHS Compliant (Note 1)\"Green\" Molding Compound (No Br, Sb)
Qualified to AEC-Q101 Standards for High Reliability
PowerDI ä5
········
Case: PowerDIä5
Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0Moisture Sensitivity: Level 1 per J-STD-020CTerminals: Finish – Matte Tin annealed over Copperleadframe. Solderable per MIL-STD-202, Method 208Polarity: See Diagram on Page 4Marking: See Page 3
Ordering Information: See Page 3Weight: 0.096 grams (approximate)
e3TOP VIEWBOTTOM VIEW
Maximum Ratings
@ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
CharacteristicPeak Repetitive Reverse VoltageWorking Peak Reverse VoltageDC Blocking VoltageRMS Reverse VoltageAverage Rectified Output Current (See also figure 4)Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated LoadSymbolVRRMVRWMVRVR(RMS)IOIFSM Value 200 141 4 125UnitVVAAThermal CharacteristicsCharacteristicThermal Resistance Junction to Soldering PointThermal Resistance Junction to Ambient Air (Note 2) TA = 25°CThermal Resistance Junction to Ambient Air (Note 3) TA = 25°CThermal Resistance Junction to Ambient Air (Note 4) TA = 25°COperating Temperature RangeStorage Temperature RangeSymbolRqJSRqJARqJARqJATjTSTGTyp¾856040 -65 to +175 -65 to +175Max3.0¾¾¾Unit°C/W°C/W°C/W°C/W°C°CNotes: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. 2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
1 of 4PDU420
PowerDI is a trademark of Diodes Incorporated. www.diodes.com ã Diodes Incorporated
http://oneic.com/
DS30549 Rev. 7 - 2
Electrical Characteristics
Characteristic@ TA = 25°C unless otherwise specified
SymbolV(BR)RValue2000.8750.710.890.850.721.25515025UnitVIR = 5mAIF = 3A, TS = 25°CIF = 3A, TS = 150°CIF = 4A, TS = 25°CIF = 4A, TS = 100°CIF = 4A, TS = 150°CIF = 12A, TS = 25°CTS = 25°C, VR = 200V TS = 150°C, VR = 200VIF = 0.5A, IR = 1.0AIRR = 0.25A (See figure 7)Test ConditionMinimum Reverse Breakdown Voltage (Note 5) Maximum Forward Voltage VFMVMaximum Reverse Leakage Current (Note 5) Maximum Reverse Recovery TimeNotes: 5. Short duration test pulse used to minimize self-heating effect.
IRMtrrmAnsIF, INSTANTANEOUS FORWARD CURRENT (A)10010Tj = 175°C100Tj = 175°C10Tj = 150°CTj = 125°C1Tj = 150°C100m
Tj = 125°C1Tj = 85°C10m
Tj = 85°C0.1Tj = 25°C1m
Tj = 25°C0.01Tj = -65°CTj = -65°C0.00111.21.400.20.40.60.8050100150200VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Typical Forward Characteristics
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 2 Typical Reverse Characteristics5
300f = 1MHzCT, TOTAL CAPACITANCE (pF)IF, DC FORWARD CURRENT (A)2504
Note 32001503
2
Note 21005000510152025301
00
25
50
75
100
125
150
175
TA, AMBIENT TEMPERATURE (°C)Fig. 4 DC Forward Current Derating
VR, REVERSE VOLTAGE (V)Fig. 3 Typical Total Capacitance
2 of 4
PowerDI is a trademark of Diodes Incorporated. www.diodes.comhttp://oneic.com/
DS30549 Rev. 7 - 2PDU420
6
PF, FORWARD POWER DISSIPATION (W)IPK= 1 (DC)IAV250
Note 2VR, DC REVERSE VOLTAGE (V)200
4.5
150
3
100
1.5
50
00
1
2
3
4
5
6
7
8
9
10
IF, FORWARD CURRENT (A)Fig. 5 Forward Power Dissipation
00
50
100
150
200
TA, DERATED AMBIENT TEMPERATURE (°C)Fig. 6 Operating Temperature Deratingtrr+0.5A
(+)50V DCApproxDeviceUnderTest(-)PulseGenerator(Note 2)Oscilloscope(Note 1)0A-0.25A
(-)(+)-1.0A
Set time base for 50/100 ns/cm
Fig. 7 Reverse Recovery Time Characteristic and Test Circuit
Ordering Information
DevicePDU420-13Notes:
(Note 6)
PackagingPowerDIä5Shipping5000/Tape & Reel6.For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
U420
YYWWK
U420 = Product type marking code = Manufacturers’ code markingYYWW = Date code marking
YY = Last digit of year ex: 06 for 2006 WW = Week code 01 to 52 K = Factory Designator
3 of 4
PowerDI is a trademark of Diodes Incorporated. www.diodes.comhttp://oneic.com/
DS30549 Rev. 7 - 2PDU420
Package Outline Dimensions
Db2L1AA2PowerDIä5DimEMin1.050.330.801.703.906.405.300.750.501.20Max1.150.430.991.884.056.605.450.950.651.50E1AA2b1L1eb1DD2b2LE2Eb1A2b2DD2EeE1E2LL13.05 NOM1.84 NOM3.55 NOMWeb1LEFT PINRIGHT PINL1b1BOTTOMSIDEHEAT SINKWAll Dimensions in mmNote: Pins Left & Right must be electrically connected at the printed circuit board.IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
4 of 4
PowerDI is a trademark of Diodes Incorporated. www.diodes.comhttp://oneic.com/
DS30549 Rev. 7 - 2PDU420
分销商库存信息:
DIODESPDU420-13
因篇幅问题不能全部显示，请点此查看更多更全内容