Low-Voltage, Quad, SPST CMOS Analog Switches
General Description
____________________________Features
The MAX4610/MAX4611/MAX4612 are quad, low-volt-age, single-pole/single-throw (SPST) analog switches. ♦Offered in Automotive Temperature Range(-40°C to +125°C)
On-resistance (100Ω, max) is matched between switch-es to 4Ω, max and is flat (4Ω, max) over the specified♦Guaranteed On-Resistance
100Ωmax (5V Supply)signal range. Each switch handles V+ to GND analog46Ωmax (12V Supply)
signal levels. Maximum off-leakage current is only 1nAat T♦A= +25°C and 2nA at TA= +85°C.
♦Guaranteed Match Between Channels (4Ω, max)The MAX4610 has four normally open (NO) switches,♦Guaranteed Flatness Over Signal Range (18Off-Leakage Current Over Temperature Ω, max)and the MAX4611 has four normally closed (NC)< 2nA at Tswitches. The MAX4612 has two NO switches and twoNC switches. These CMOS switches operate from a♦single +2V to +12V supply. All digital inputs have +0.8V♦> 2kV ESD Protection per Method 3015.7A= +85°C
and +2.4V logic thresholds, ensuring TTL/CMOS-logic♦Rail-to-Rail Signal HandlingTTL/CMOS-Logic Compatible
compatibility when using a single +5V supply.
Ordering InformationPARTTEMP RANGEPIN-PKGPACKAGECODE________________________Applications
MAX4610CUD0°C to +70°C14 TSSOPU14-1MAX4610CSD0°C to +70°C14 Narrow SOS14-2Battery-Operated EquipmentMAX4610CPD0°C to +70°C14 Plastic DIPP14-6Audio/Video Signal Routing
MAX4610C/D0°C to +70°CDice*—Low-Voltage Data-Acquisition SystemsMAX4610EGE-40°C to +85°C16 QFN-EP**G1644-1Sample-and-Hold CircuitsMAX4610EUD-40°C to +85°C14 TSSOPU14-1Communication Circuits
MAX4610ESD-40°C to +85°C14 Narrow SOS14-2MAX4610EPD-40°C to +85°C14 Plastic DIPP14-6MAX4610ASD-40°C to +125°C14 Narrow SOS14-2Ordering Information continued at end of data sheet.*Contact factory for dice specifications.**EP = Exposed pad.
Pin Configurations/Truth Tables
V+N.C.IN1IN4MAX461016151413TOP VIEWNO1114V+NO11EP**12N.C.COM1213IN1NO2312IN4INPUTSWITCH STATELOWOFFCOM1211NO4COM2411NO4HIGHONMAX4610IN2510COM4NO2310COM4IN369COM3COM249COM3GND78NO3TSSOP/SO/DIP5678IN2IN3GNDNO3MAX4611/MAX4612 Pin Configurations/Truth Tables appear at end of data sheet.**EP = EXPOSED PADQFN CONNECT EP TO V+________________________________________________________________Maxim Integrated Products1
For pricing, delivery, and ordering information,please contact Maxim Directat 1-888-629-4642,or visit Maxim’s website at www.maxim-ic.com.
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND.)
V+...........................................................................-0.3V to +13VIN_, COM_, NO_, NC_ (Note 1)....................-0.3V to (V+ + 0.3V)Continuous Current (any terminal)
(pulsed at 1ms, 10% duty cycle).....................................20mAPeak Current (any terminal)
(pulsed at 1ms, 10% duty cycle).....................................40mAESD per Method 3015.7......................................................> 2kV
Continuous Power Dissipation (TA= +70°C)
14-Pin TSSOP (derate 6.3mW/°C above +70°C)..........500mW14-Pin Narrow SO (derate 8.00mW/°C above +70°C)..640mW14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)..800mW16-Pin QFN (derate 18.5mW/°C above +70°C)..........1481mWOperating Temperature Ranges
MAX461_C_ _......................................................0°C to +70°CMAX461_E_ _....................................................-40°C to +85°CMAX461_A_ _.................................................-40°C to +125°CStorage Temperature Range.............................-65°C to +160°CLead Temperature (soldering, 10s).................................+300°C
Note 1:Signals on NO_, NC_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, VIN_H= 2.4V, VIN_L= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERANALOG SWITCHAnalog Signal Range(Note 3)VCOM_,VNO_,VNC_RONV+ = 4.5V,ICOM_= 1mA,VNO_= VNC_ = 3VV+ = 4.5V,ICOM_= 1mA,VNO_= VNC_ = 3VV+ = 4.5V;ICOM_= 1mA;VNO_= VNC_ = 3V, 2V, 1VV+ = 5.5V;VCOM_= 1V, 4.5V;VNO_= 4.5V, 1VTA= +25°CTA= TMINto TMAXTA= +25°CTA= TMINto TMAXTA= +25°CTA= TMINto TMAXTA= +25°CTA= -40°C to +85°CTA= -40°C to +125°CTA= +25°CTA= -40°C to +85°CTA= -40°C to +125°C-0.1-2-30-0.1-2-30-0.2-4-30121.0070V+1001504818Ω25+0.1+2+30+0.1+2+30+0.2+4+30nAnAnAΩΩVSYMBOLCONDITIONSMINTYP(Note 2)MAXUNITSOn-ResistanceOn-Resistance MatchBetween Channels (Note 4)ΔRONOn-Resistance Flatness (Note 5)RFLAT(ON)NO_ or NC_ Off-LeakageCurrent (Note 6)INO(OFF)COM_ Off-Leakage Current(Note 6)ICOM(OFF)V+ = 5.5V;VCOM_= 1V, 4.5V;VNO_= VNC_ = 4.5V, 1VCOM_ On-Leakage Current(Note 6)ICOM(ON)TA= +25°CV+ = 5.5V;VCOM_= 1V, 4.5V;T= -40°C to +85°CVNO_= VNC_ = 1V, 4.5V, Aor floatingTA= -40°C to +125°C2_______________________________________________________________________________________元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)
(V+ = +5V ±10%, VIN_H= 2.4V, VIN_L= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERSYMBOLCONDITIONSMINTYPMAX(Note 2)UNITSLOGIC INPUTInput Current with Input-Voltage HighIIN_HVIN_= 2.4V, all others = 0.8V-0.1±0.001+0.1µAInput Current with Input-Voltage LowIIN_LVIN_= 0.8V, all others = 2.4V-0.1±0.001+0.1µAInput High VoltageVIN_H2.41.5VInput Low VoltageVIN_L1.40.8VDYNAMIC (Note 3)Turn-On TimetONVCOM_= 3V, Figure 2TA= +25°C3560TA= TMINto TMAX80nsTurn-Off TimetOFFVCOM_= 3V, Figure 2TA= +25°C1520TA= TMINto TMAX30nsOn-Channel BandwidthBWSignal = 0dBm, Figure 4,50Ωin and outTA= +25°C300MHzCharge InjectionVCTECL= 1.0nF, VGEN= 0,RGEN= 0, Figure 3TA= +25°C15pCOff-Isolation (Note 7)VISORL= 50Ω, CL= 5pF,f = 1MHz, Figure 4TA= +25°C-60dBCrosstalk (Note 8)VCTRL= 50Ω, CL= 5pF,f = 1MHz, Figure 5TA= +25°C-80dBNO_ or NC_ CapacitanceC(OFF)f = 1MHz, Figure 6TA= +25°C16pFCOM_ Off-CapacitanceCCOM(OFF)f = 1MHz, Figure 6TA= +25°C16pFCOM_On-CapacitanceCCOM(ON)f = 1MHz, Figure 6TA= +25°C23pFTotal HarmonicDistortionTHD600ΩIN and OUT,20Hz to 20kHz, 2VP-PTA= +25°C0.009%SUPPLYPower-Supply Range212VSupply CurrentI+VIN= 0 or V+,all switches on or off-1±0.001+1µA_______________________________________________________________________________________3
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = +3V, VIN_H= 2.4V, VIN_L= 0.5V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERANALOG SWITCHAnalog Signal Range(Note 3)VCOM_,VNO_,VNC_RONV+ = 2.7V,ICOM_= 1mA,VNO_= VNC_= 1VV+ = 2.7V,ICOM_= 1mA,VNO_= VNC_= 1VV+ = 3.6V,VCOM_= 0.5V, 3V;VNO_= VNC_= 3V,0.5VV+ = 3.6V,VCOM_= 0.5V, 3V;VNO_= VNC_= 3V,0.5VV+ = 3.6V,VCOM_= 0.5V, 3V;VNO_= VNC_= 0.5V,3V, or floatingTA= +25°CTA= TMINto TMAXTA= +25°CTA= TMINto TMAXTA= +25°CTA= -40°C to + 85°CTA= -40°C to + 125°CTA=+25°CTA= -40°C to + 85°CTA= -40°C to + 125°CTA= +25°CTA= -40°C to +85°CTA= -40°C to +125°C-0.1-2-30-0.1-2-30-0.2-4-302.41.01.0TA= +25°CTA= -40°C to +85°CTA= -40°C to +125°CTA= +25°CTA= TMINto TMAX30500.5901201404560nsns20V+VSYMBOLCONDITIONSMINTYP(Note 2)MAXUNITS175360450510+0.1+2+30+0.1+2+30+0.2+4+30VVnAnAnAΩΩOn-ResistanceOn-Resistance MatchBetween Channels (Note 4)ΔRONNO_ or NC_ Off-LeakageCurrent (Notes 3, 6)INO(OFF)COM_ Off-Leakage Current(Notes 3, 6)ICOM(OFF)COM_ On-Leakage Current(Notes 3, 6)LOGIC INPUTSInput High VoltageInput Low VoltageDYNAMIC(Note 3)Turn-On TimeICOM(ON)VIN_HVIN_LtONVCOM_= 1.5V,Figure 2VCOM_= 1.5V,Figure 2Turn-Off TimetOFF4_______________________________________________________________________________________
元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—Single +12V Supply
(V+ = +12V, VIN_H= 4V, VIN_L= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERSYMBOLCONDITIONSMINTYPMAX(Note 2)UNITSANALOG SWITCHAnalog Signal RangeVCOM_,(Note 3)VNO_,0V+VVNC_,V+ = 12V,On-ResistanceRTA= +25°C3045ONICOM= 2mA,VNO_= VNC_= 10VTA= TMINto TMAX60ΩLOGIC INPUTSInput High VoltageVIN_H4.02.8VInput Low VoltageVIN_L2.50.8VSUPPLYPositive Supply CurrentI+VIN_= 0 or V+, all switches on or off-1±0.001+1µANote 2:The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3:Guaranteed by design.
Note 4:ΔRON= RON(max) - RON(min).
Note 5:Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6:Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.Note 7:Off-Isolation = 20log10(VCOM_/ VNO_), VCOM_= output, VNO_= input to off switch.Note 8:Between any two switches.
_______________________________________________________________________________________5
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
ON-RESISTANCE
vs. VCOM AND TEMPERATURE
V+ = +5VMAX4610 toc02MAX4610-1BON-RESISTANCE vs. VCOM
MAX4610-1AON-RESISTANCE vs. VCOM
400350300RON (Ω)250200150
V+ = +3V40
V+ = +5V30
0
1
2
3VCOM (V)
4
5
6
0
RON (Ω)V+ = +2V9080
807060RON (Ω)50403020
0
V+ = +12V2
4
6VCOM (V)
8
10
V+ = +9VV+ = +5VTA = +85°C706050
TA = -40°CTA = +25°C10050
12
0.51.01.52.02.53.03.54.04.55.0
VCOM (V)
OFF-LEAKAGE vs. TEMPERATURE
MAX4610-03ON-LEAKAGE vs. TEMPERATURE
MAX4610-04SUPPLY CURRENT vs. TEMPERATURE
V+ = +5V1
MAX4610-05100
V+ = +5VVCOM_ = 0VNO_ OR VNC_ = +4.5VOFF-LEAKAGE (pA)10
1000100ON-LEAKAGE (pA)V+ = +5VVCOM_ = 0VNO_ OR VNC_ = FLOATING10
10
I+ (pA)0.1
1
1
0.1
0.1
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
0.01
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
0.01
0.001
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
CHARGE INJECTION vs. VCOM
MAX4610 toc06FREQUENCY RESPONSE
0-10-20-30
PHASEMAX4610 toc07TOTAL HARMONIC DISTORTION PLUS NOISE
vs. FREQUENCY
144108
PHASE (DEGREES)72360-36
0.1THD + N (%)V+ = +2V, 1Vp-p SIGNAL600Ω IN AND OUTMAX4610-0865CHARGE INJECTION (pC)43
V+ = +12V210-1
0
2
4
6VCOM_ (V)
8
10
V+ = +5VLOSS1801
GAIN (dB)-40-50-60-70-80-90
OFF-ISOLATION-72-108-1440.01
V+ = +3V, 1Vp-p SIGNALV+ = +5V, 2Vp-p SIGNAL12
-100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
-180100M500M
0.001
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
6_______________________________________________________________________________________
元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches
Pin Description
PINMAX4610MAX4611MAX4612NAMEFUNCTIONTSSOP/SO/ DIPQFNTSSOP/SO/DIPQFNTSSOP/SO/DIPQFN1, 3, 8, 111, 3,Analog Switch Normally Open8, 11————NO1–NO4Terminals——1, 3, 8, 111, 3,Analog Switch Normally Closed8, 11——NC1–NC4Terminals————1, 81, 8NO1, NO3Analog Switch Normally OpenTerminals————3, 113, 11NC2, NC4Analog Switch Normally ClosedTerminals2, 4, 9, 102, 4,2, 4,2, 4,Analog Switch Common9, 102, 4, 9, 109, 102, 4, 9, 109, 10COM1–COM4Terminals13, 5, 6, 1214, 5,14, 5,14, 5,6, 1313, 5, 6, 126, 1313, 5, 6, 126, 13IN1–IN4Logic-Control Digital Input777777GNDGround. Connect to digitalground.—12, 15—12, 15—12, 15N.C.No Connection. Not internallyconnected.Positive Analog and Digital-141614161416V+Supply Voltage Input. Internallyconnected to substrate.—EP—EP—EPEPExposed Pad. Connect to V+.Applications Information
POSITIVE SUPPLYPower-Supply Sequencingand Overvoltage Protection
V+MAX4610Do not exceed the absolute maximum ratings, becauseMAX4611stresses beyond the listed ratings may cause permanentMAX4612damage to the devices.
Proper power-supply sequencing is recommended for allNO_COM_CMOS devices. Always apply V+ before applying analogsignals or logic inputs, especially if the analog or logicVgsignals are not current limited. If this sequencing is notpossible, and if the analog or logic inputs are not currentlimited to 20mA, add a small-signal diode (D1) as shownin Figure 1. If the analog signal can dip below GND, addD2. Adding protection diodes reduces the analog signalFigure 1. Overvoltage Protection Using Two External Blockingrange to a diode drop (about 0.7V) below V+ (for D1),Diodesand to a diode drop above ground (for D2). Leakage isunaffected by adding the diodes. On-resistance increas-significant when low supply voltages (+5V or less) arees by a small amount at low supply voltages. Maximumused. With a +5V supply, TTL compatibility is not guar-supply voltage (V+) must not exceed 13V.
anteed when protection diodes are added. Driving IN1Adding protection diodes causes the logic thresholds toand IN2 all the way to the supply rails (i.e., to a diodebe shifted relative to the power-supply rails. This can be
drop higher than the V+ pin, or to a diode drop lowerthan the GND pin) is always acceptable.
_______________________________________________________________________________________
7
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612Protection diodes D1 and D2 also protect against someovervoltage situations. With Figure 1’s circuit, if the sup-ply voltage is below the absolute maximum rating, andif a fault voltage up to the absolute maximum rating isapplied to an analog signal pin, no damage will result.
single-supply operation with some precautions.Theabsolute maximum rating for V+ is +13.2V (referencedto GND). When operating near this region, bypass V+with a minimum 0.1µF capacitor to ground as close tothe IC as possible.
Caution: The absolute maximum V+ to V- differentialvoltage is 13.0V. Typical ±6V or 12V supplies with±10% tolerances can be as high as 13.2V.This volt-age can damage the MAX4610/MAX4611/MAX4612.Even ±5% tolerance supplies may have overshoot ornoise spikes that exceed 13.0V.
Operating Considerations for
High-Voltage Supply
The MAX4610/MAX4611/MAX4612 are pin-compatiblewith the industry-standard 74HC4066 and theMAX4066, and are optimized for +5V single-supplyoperation. The MAX4610 family is capable of +12V
______________________________________________Test Circuits/Timing Diagrams
MAX4610MAX4611MAX4612VCOM_SWITCHINPUTV+V+SWITCHOUTPUTVOUTRL300ΩCL35pFVOUTSWITCHOUTPUT0VtONLOGICINPUTVINH0V50%50%tR < 20nstF < 20nsCOM_NO_, NC_IN_LOGICINPUTGNDtOFF0.9 · V0UT0.9 · VOUTCL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL VOUT = VCOM RL + RON()Figure 2. Switching Time
MAX4610MAX4611MAX4612RGENCOM_V+V+NO_, NC_CLGNDIN_ OFFONQ = (ΔVOUT)(CL)VOUT ΔVOUTVOUT VGENINVINOFFFigure 3. Charge Injection8
_______________________________________________________________________________________
元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches
Test Circuits/Timing Diagrams (continued)
MAX461010nFV+MAX461110nFV+MAX4610MAX4611MAX4612MAX4612SIGNALSIGNALV+GENERATOR 0dBmGENERATOR 0dBmCOM_V+COM1NO150ΩVIN_L ORIN1IN2IN_ VIN_HVINL ORVINL ORVINHVINHANALYZERNO_, NC_ANALYZERNO2COM2GNDGNDRRLLFigure 4. Off-Isolation/On-Channel BandwidthFigure 5. Crosstalk
Ordering Information (continued)PIN-PKG10nFV+MAX4610MAX4611PARTTEMP RANGEPACKAGECODEMAX4612MAX4611CUD0°C to +70°C14 TSSOPU14-1COM_V+MAX4611CSD0°C to +70°C14 Narrow SOS14-2MAX4611CPD0°C to +70°C14 Plastic DIPP14-6MAX4611C/D0°C to +70°CDice*—CAPACITANCEIN_ VINL ORVINHMAX4611EGE-40°C to +85°C16 QFN-EP**G1644-1METERMAX4611EUD-40°C to +85°C14 TSSOPU14-1NO_, NC_f = 1MHzMAX4611ESD-40°C to +85°C14 Narrow SOS14-2GNDMAX4611EPD-40°C to +85°C14 Plastic DIPP14-6MAX4611AUD-40°C to +85°C14 TSSOPU14-1MAX4611ASD-40°C to +85°C14 Narrow SOS14-2MAX4612CUD0°C to +70°C14 TSSOPU14-1Figure 6. Channel Off/On-CapacitanceMAX4612 CSD0°C to +70°C14 Narrow SOS14-2MAX4612CPD0°C to +70°C14 Plastic DIPP14-6MAX4612C/D0°C to +70°CDice*MAX4612EUD-40°C to +85°C14 TSSOPU14-1MAX4612ESD-40°C to +85°C14 Narrow SOS14-2MAX4612EGE-40°C to +85°C16 QFN-EP**G1644-1MAX4612EPD-40°C to +85°C14 Plastic DIPP14-6MAX4612AUD-40°C to +125°C14 TSSOPU14-1MAX4612ASD-40°C to +125°C14 Narrow SOS14-2*Contact factory for dice specifications.**EP = Exposed pad.
_______________________________________________________________________________________
9
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612Pin Configurations/Truth Tables (continued)
V+N.C.IN114IN4TOP VIEWNC11COM12NC23COM24IN25IN36GND7MAX461114V+13IN112IN411NC410COM49COM38NC3INPUTLOWHIGHSWITCH STATEONOFF16NC1COM1NC2COM212EP**15131211N.C.NC4COM4COM3MAX4611345IN2109TSSOP/SO/DIP6IN37GNDQFN8NC3**EP = EXPOSED PAD, CONNECT EP TO V+V+N.C.IN114IN4TOP VIEWNO11COM12NO23COM24IN25IN36GND7MAX461214V+13IN112IN411NC410COM49COM38NC3INPUTLOWHIGHNO1, NO2OFFONNC3, NC4ONOFF16NO1COM1NC2COM212EP**15131211N.C.NC4COM4COM3MAX4612345IN2109TSSOP/SO/DIP6IN37GNDQFN8NO3**EP = EXPOSED PAD, CONNECT EP TO V+Revision History
Pages changed at Rev 4: 1–5, 7, 9, 10, 13.
10______________________________________________________________________________________
元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches
___________________________________________________________Chip Topographies
MAX4610/MAX4611MAX4612 V+ IN1IN4 V+ IN1IN4NO1 (NC1)NO1COM1NO4(NC4)COM1NC4NO2 (NC2)COM4NO2COM4COM20.049\"(1.24mm)COM20.049\"(1.24mm)COM3COM3IN2IN3GNDNO3 (NC3)IN2IN3GNDNC30.054\"0.054\"(1.37mm)(1.37mm)( ) ARE FOR MAX4611TRANSISTOR COUNT: 132SUBSTRATE CONNECTED TO V+
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)
SPE.mm04.4POSSTPACKAGE OUTLINE, TSSOP 4.40mm BODY21-0066I11______________________________________________________________________________________11MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches61Package Information (continued)(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)4XAM/1164XAM/0164XAM12SPE. INCHESMILLIMETERSNCIDIMMINMAXMINMAXOSA0.0530.0691.351.75NA10.0040.0100.100.25B0.0140.0190.350.49C0.0070.0100.190.25e0.050 BSC1.27 BSCE0.1500.1573.804.00EHH0.2280.2445.806.20L0.0160.0500.401.27VARIATIONS:1INCHESMILLIMETERSTOP VIEWDIMMINMAXMINMAXNMS012D0.1890.1974.805.008AAD0.3370.3448.558.7514ABD0.3860.3949.8010.0016ACDACeBA10∞-8∞LFRONT VIEWSIDE VIEWPROPRIETARY INFORMATIONTITLE:PACKAGE OUTLINE, .150\" SOICAPPROVALDOCUMENT CONTROL NO.REV.21-0041B11SPE.NPIDP______________________________________________________________________________________元器件交易网www.cecb2b.comLow-Voltage, Quad, SPST CMOS Analog Switches
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)
SPE.NFQ L23Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses areimplied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________13©2007 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
MAX4610/MAX4611/MAX4612
因篇幅问题不能全部显示，请点此查看更多更全内容