KT板航模遥控飞机F制作图纸

CM012345678910INCHSides (Make 2)01234DoublersF-16C FALCON - EASYBUILD - V1.02Designed by Nick CaraDepron = 6mmWing span = 71cm (28”)Length = 104cm (41”) SETUP :- Weight (painted) = 356g Weight (painted and with battery) = 486g Static thrust = 650g Prop = 6x4 Motor = 2000kv ESC = 25A minimum Battery = 1350mAh 3s1p 25C Li-Po (Can take up to 2170mAh) Radio = 3CH (or 4CH with optional rudder) Aileron throw = +/- 20 degrees Elevon throw = +/- 25 degrees Expo = 45%NOTES:- Bevel or curve all leading edges. Trim and sand intake to a curve. Use Hot Glue for all parts except carbon rod. Protect lower edge of intake and lower 󰁄ns with packing tape. Connect both Ailerons and Elevons to a single pair of servos. Paint use colours that will stand out in the sky, don’t leave it white.

Battery positionCOG 7cm to 8cm from wing break.Cut here for rudder (Optional)Max prop size 6”Cut here for rudder (Optional)3mm or 4mm Carbon rod epoxy into V slotMissile (attach to wing tip)Right AileronMissile (attach to wing tip)Right ElevonControl pointControl pointControl pointControl pointDoublers (For Intake)Doublers (For Intake)Left ElevonLeft AileronDoublers (For Intake)MOTOR MOUNT PARTSDoublers (For Intake)3mm PLYWOODGlue Plywood onto DepronDoublersHatch to acces electronics and batteryControl points (Make 4 from old plastic credit card)Intake leading edge (Depron or Balsa)DoublersDoublers used in cornersTailCut here for rudder (Optional)Upper FuseRudder (Optional)Lower Front FuseRudder Servo (Optional)Control pointLower Rear Fuse