TDD VoLTE功能开启指导书-华为

1.VOLTE功能配置(已开)

MOD ENODEBALGOSWITCH: EutranVoipSupportSwitch=ON;

2.eSRVCC功能配置

✓ 创建GERAN相邻频点组(CSFB已经配置频点组的情况下，不需要重新配置)( EDGE;0; 配置2)

ADD GERANNFREQGROUP: LocalCellId=1, BcchGroupId=0,

GeranVersion=GSM, StartingArfcn=50, BandIndicator=GSM_dcs1800,

CellReselPriorityCfgInd=NOT_CFG, PmaxGeranCfgInd=NOT_CFG;

✓ 创建GERAN BCCH相邻频点(可与CSFB使用相同频点):

ADD GERANNFREQGROUPARFCN: LocalCellId=1, BcchGroupId=0,

GeranArfcn=50;

✓ 创建GERAN外部小区:

ADD GERANEXTERNALCELL: Mcc=\"460\Mnc=\"00\GeranCellId=19411, Lac=18372, RacCfgInd=NOT_CFG, BandIndicator=GSM_dcs1800, GeranArfcn=55, NetworkColourCode=1, BaseStationColourCode=0, CellName=\"G-呼市移动-1\";

✓ 创建GERAN邻区关系:

ADD GERANNCELL: LocalCellId=1, Mcc=\"460\Mnc=\"00\Lac=18372, GeranCellId=19411;

✓ 配置切换算法:

MOD ENODEBALGOSWITCH:

HoModeSwitch=UtranSrvccSwitch-0&GeranSrvccSwitch-1;

✓ QCI1的异系统策略配置组为0，QCI5、QCI9的异系统策略配置组为3:

MOD STANDARDQCI: Qci=QCI5, InterRatPolicyCfgGroupId=3;

✓ 修改异系统策略配置组，确保GERAN SRVCC切换开启:

MOD INTERRATPOLICYCFGGROUP: InterRatPolicyCfgGroupId=0, GeranGsmHoCfg=SRVCC-1,

UtranHoCfg=SRVCC-0,

GeranGprsEdgeHoCfg=SRVCC-1;

✓ 现网异系统切换公共切换参数组为0，为了不影响现网异系统公共切换参数，增加异系统切换公共切换参数组1用来配置SRVCC异系统切换参数：

ADD INTERRATHOCOMMGROUP: LocalCellId=1, InterRatHoCommGroupId=1, InterRatHoA1ThdRsrp=-100, InterRatHoA2ThdRsrp=-105;

MOD CNOPERATORHOCFG: GeranA2ThdRsrpOffset=-10;

MOD CELLHOPARACFG: LocalCellId=1, BlindHoA1A2ThdRsrp=-122;

✓ 修改QCI1对应的异系统切换公共切换参数组：

MOD CELLSTANDARDQCI: LocalCellId=1, Qci=QCI1,

InterRatHoCommGroupId=1;

✓ 修改GERAN切换参数组：

MOD INTERRATHOGERANGROUP: InterRatHoGeranGroupId=0,

InterRatHoGeranB1Thd=-95;

✓ 配置QCI切换优先级：

MOD CELLSTANDARDQCI: LocalCellId=1, Qci=QCI1, QciPriorityForHo=1;

MOD CELLSTANDARDQCI: LocalCellId=1, Qci=QCI5, QciPriorityForHo=2;