CONDUCTIVITY SetCD set: 12.80 mS/cmCD set: 15.70 mS/cmConc. set = 0 %conc. set = –X %Conc. set. = +10 %Conc. set. = –X %ACKNOWLEDGEDACKNOWLEDGEDCD set: XX.X mS/cmCD set: 12.80 mS/cmDATA STOREDACKNOWLEDGEDCD set: 12.80 mS/cm1234XXXXXXXXXXXXXXXXADC-digits[ADC-digits (OCM)]steps(concentrate pump)steps(bicarbonate pump)ADC-digits[ADC-digits (OCM)]CALIB.CONDUCTIVITY(电导度校准)：1.在Calib.conductivity菜单下按确认键，出现2.condSet12.8mS/cm 按 上下键改变12.8这个数字到13.43.再按conc.键，就会出现conc.set-0%4.这时用上下键改变-0%的数字到-6%，并按下override键存储，5.菜单跳出ACKNOWLEDGED 6.几秒后当cond. Set 13.4mS/cm出现时按下override键存储.此时电导度 下限位就设好了。7.接着菜单会跳出cond. Set15.7mS/cm8.更改这个数字为14.8后按下conc.键，conc.set=0%就会出现，9.用上下键更改+0%到+10%后按override键10.机器会跳出ACKNOWLEDGED11.几秒后跳出cond.set 14.8 mS/cm，此时按下（override）12.DATE STORED结束
因篇幅问题不能全部显示，请点此查看更多更全内容